Thermal Shock Test
Rapid Change Temperature Test
-
Scope: Rapid change between two temperatures (thermal shock) in air
-
Test Specimen details
-
Maximum size up to 500 x 600 x 430 mm (L X W X H)
-
Maximum Specimen Weight approximately 20kg
-
-
Meets Test Standards: IEC 60068-2-1, IS 9000, JSS 55555, MIL STD 810G
-
Performs tests using world class environmental simulation chambers. Weiss Technik Make, Model TS-130 and its main technical specifications are
-
Temperature range hot zone +60 to +180 °C
-
Temperature range cold zone -10°C to -70°C
-
Set temperature tolerance with in ±3°C
-
Changeover time 10 seconds
-
Automatic specimen transport
-
-
Application – Testing of electronic and electrical components, machines, equipments, process control devices, testing of materials etc.
Testing Standards
-
IEC 60068-2-14 ET: Test N: Change of temperature
-
IEC 60749 Semiconductor Devices–Mechanical & climatictest methods
-
IS 9000-14: Basic ET procedures Test N: Change of temp., Sec 1 To 3
-
JSS 55555: Test Number 22 Rapid Temperature Cycling (Thermal Shock)
-
MIL-STD-810G-2: Environmental Engineering Considerations and Laboratory Tests Test Method 503.5 Temperature Shock
-
MIL-STD-202G: ET- Test Number 107G Thermal shock
-
MIL_E-5272: Environmental Testing, Aeronautical AndAssociated Equipment
-
JESD22 A106- Thermal Shock
Our tests Meets:
-
Testing Application
-
Maximum Specimen Weight approximately 20kg
-
Electronic and electrical machines & equipments
-
Process control devices
-
Testing of materials
-
Automotive components etc.
-
Mobiles & Consumer Electronics
-
Defence Modules & Systems
-